Direction of use of the TESTMACHINE

To start:

Light the machine button on side.

Take the case in the right or left hand with the inch placed on the transmitter

By looking at LEDs with the transmitter directed towards you.

To begin your test you must have the following configuration of LEDs:

Extinct	Lit	Lit	Extinct
Green	Orange	Orange	Green

You can exert the first pressure

While you exert the first pressure you will have the following configuration:

Extinct	Extinct	Lit	Lit
Green	Green	Orange	Orange

You releasethe pressure

You will have the following configuration:

Extinct	Extinct	Lit	Extinct
Green	Green	Orange	Green

You can exert the second pressure

You support, you will have the following configuration during your pressure.

Extinct	Lit	Lit	Extinct
Green	Orange	Orange	Green

Relachez pressure

Results the machine then will calculate the difference between the first and the second pressure.

If the first pressure is strongest you will have the following configuration

Extinct	Extinct	Extinct	Lit
Green	Green	Green	Orange

If the second pressure is strongest you will have the following configuration

Lit	Extinct	Extinct	Extinct
Orange	Green	Green	Green

If the two pressures are equal you will have the following configuration

Lit	Extinct	Extinct	Lit
Orange	Green	Green	Orange

To continue a second test

Lit	Lit	Lit	Lit
Orange	Orange	Orange	Orange

If you squeeze a little bit you fall down on the configuration to begin your test. See at the beginning of this direction of use

IMPORTANT REMARK

The machine measures only the differences in force. Manufacturer is not responsible for the interpretation of the results, nor the use made by user.

The use of the machine cannot replace the diagnostic of a doctor. It is absolutely essential, in the event of medical problems, to consult your doctor or a professional of health.